How to hang weed eater?
A weed eater can be easily hung on a set of closet shelf brackets. The place where the clothes rod rests forms a great cradle for your weed eater to hang horizontally on any wall. Shop for a set of closet shelf brackets at your local home improvement store. Choose a spot on your wall to hang your weed eater.
Should string trimmers spin clockwise or counter clockwise?
1) Most straight shaft trimmers spin their string counter clockwise. As a result, when these trimmers are used to trim against a wall, they cut through the grass much more cleanly and efficiently when moved along said wall from right to left.
Should you edge or mow first?
By mowing first, you know how short to trim grass along edges and will be less likely to scalp those areas, giving rise to bare or weedy patches.
Is it OK to cut grass with weed wacker?
Cutting grass with an electric or battery powered weed trimmer is slightly different from using it to remove weeds. Since you are trying to get an even cut, hold the head even with the ground and make short sweeping motions as you trim. You also want to be careful not to cut the grass too short.
How much string should be left out of a weed eater?
With the last 6 inches of string left, feed it through the exit hole within the weed eater head that houses the spool. Ensure that the spool notch is aligned properly and press the spool into the weed eater's head until it clicks into place.
Why do you put water in weed and feed?
And what it really does is when you put down the fertilizer and its got the pre-emergent on it. And you water it in, that's really important, you end up creating this barrier underneath the soil. And these weed seeds, as they try to emerge, they hit this chemical barrier and they die before they can sprout.
Are string trimmers 2 cycle or 4 cycle?
Although 4-stroke string trimmers have a reputation for lower emissions, better fuel efficiency, and high torque output, 2-stroke trimmers have their own advantages: Lighter weight. Easier maintenance.
What does the C mean on Stihl trimmers?
The C indicates a comfort feature. On trimmers, that comfort feature is the Easy2Start™. You can also confirm it by looking for the bar code label on the trimmer housing.
What is the best time of day to cut grass?
Mid-morning (between 8 and 10 a.m.) tends to be the best time of day for mowing your lawn. It allows enough time for dew to dry, resulting in strong, perky blades of grades, while avoiding the hottest periods of the day.
What is the best time of day to cut the grass?
Mid morning or late afternoon is usually the best time to mow the lawn. If done too early in the morning the lawn will be damp with dew which can cause the grass to tear rather than cut cleanly, leading to disease. Midday can be too hot, the intense sun can stress the newly cut grass but it is not too bad a time.
What is the best height to cut grass to prevent weeds?
For this reason, some people prefer to mow at 3 or 3.5 inches. For the healthiest and most sustainable approach, Michigan State University Extension says 3.5 to 4 inches is most desirable. Lawns mowed at 3.5 or 4 inches out-compete weeds, tolerate grubs and look just as good as lawns mowed at 2.5 inches.
Is it bad to mow over weeds?
Cutting weeds damages the plant. Early mowing keeps the weed from flowering. Cutting the weeds exposes the plant closer to the roots for treatment. Frequent mowing improves the health of your grass, choking out the weed.
Can I weed eat my whole yard?
The short answer is yes, the longer answer is probably not. If your yard is very small and you are very careful, you can weed whack your lawn. If your yard is large, you may find it to be a tremendous pain and not worth doing that way.
Should you weed eat first or last?
LifeandLawns.com says the correct order is: Trimming, mowing, edging, blowing. Here's their explanation: "I want you to weed whack first so that any long bits of grass or weeds fall into the lawn and get sucked up and ground in to smaller bits by your lawn mower.
What is the cheapest way to edge a driveway?
Standard wooden edging is a great and inexpensive way to create a basic edging border for your drive. Easy to install, and relatively cheap to buy, wood is a top choice if you are on a budget.
Is it better to edge lawn when wet or dry?
Dry edging is the preferred method for a neat, clean, and precise edge. Wet edging is a good option for lawns that are difficult to edge dry and can help to avoid scalping the lawn. Whichever method you choose, it is important to use the right tools, take safety precautions, and prepare the lawn well.
How many times should I edge my lawn?
Try to edge at least once a year.
That way you don't have to wrestle with crazy overgrowth when you decide to do it.
Why do landscapers take the guard off weed eater?
Here's the deal, some lawn care pros have found that they can simply see the string better when they edge without a guard on. This allows them to better control the cut the trimmer is making as they walk along the edge they are clearing. Which can allow you to make a straighter cut and a sharper edge.
Why do landscapers take the guard off string trimmers?
It's a lot easier to trim around things without the guard, and with the guard on, the line is really too short.
Is thicker or thinner weed eater string better?
Low-voltage (up 24 volts) and small gas-powered trimmers (20 cc) work best with medium or small-sized trimmer lines. Thicker lines need more powerful engines that spin fast enough for the trimmer lines to cut through grass and weeds.
Which trimmer line is strongest?
The square trimmer line is the way to go for those who need a powerful line that can tackle the toughest jobs. The line's square-shaped edges allow it to cut through thick grass and heavy weeds easily. This square trimmer line is ideal for commercial and professional use.
Why does my trimmer line keep jamming?
If the string outside of the trimmer head gets too short, it will always return back into the trimmer head. The solution is to make sure you don't let your trimmer string get too short.
What happens if you use thicker trimmer line?
Thicker string takes more power to spin up, is noisier, and your spool won't hold as much. But, DAMN!! it'll eat thick weeds, bang curb edges free from weeds, and hold up better when you run it over cement… like when you line trim interlock. .
What happens if you don't water after weed and feed?
Until it gets watered, it will not begin to work properly. Watering after application also washes the herbicide down below the foliage of the grass, reducing contact by people walking on the lawn. Always read the label directions carefully and follow them.
Do you water weed and feed after you put it down?
After applying this product you don't water your lawn for at least 24 hours. Just like rain, watering your lawn after applying Weed & Feed washes the weed control particles off of weed leaves before they can fully work.