How to hang a whiteboard without damaging the wall? (2024)

How to hang a whiteboard without damaging the wall?

Employing Industrial-Strength Adhesive

Can you hang up a whiteboard with command strips?

Yes you can. I hung it up using several strips to make sure it was secure.

Do you need a stud to hang a whiteboard?

Whiteboards are traditionally hung on a studded drywall surface. Most companies recommend that you mount your whiteboard wall hangers directly into the (16 on center studs) in your wall.

How do you whiteboard a wall?

What ruins a whiteboard?

Avoid the hard sponge or felt cleaning pads as they tend to smear the ink rather than wipe it which can lead to staining. Also avoid wet wipes and paper towels as they have a slightly abrasive finish which can damage the surface of the whiteboard.

Do command strips leave marks on walls?

Command strips can be beneficial during wall decoration as they enable you to hang pictures and other objects without harming your wall. However, if not removed carefully, the can result in peeled paint, sticky patches with leftover residue and in some cases, cracks in the wall.

Will command strips stick to wall?

Command Strips can't stick to bumpy surfaces like textured walls, concrete and exposed brick. Heat is an enemy of the Command Strip. Heat, like direct sunlight on a glass window, makes the Command Strip lose its adhesive properties. Only use Command Strips on dry items.

How do you hang a whiteboard in a rental?

Drill a screw into at least 3 studs (leaving the heads about 1/8" from the wall), and hang the whiteboard from those. There are various ways to hang the whiteboard: You can attach regular picture wire to the back and rest that on the screwheads.

Can I hang a whiteboard on drywall?

Locate studs within the wall. Drywall alone is not enough to hold up a whiteboard, so using a stud finder (or through simply knocking on the wall), identify the location of the studs adjacent to your chosen space.

How high should a whiteboard be mounted?

As a general rule of thumb, we recommend mounting your whiteboard no higher than seven feet above the base of the floor and no lower than three-feet. To be more specific, the top of a 4 x 6' whiteboard should hang 84” off the floor; a 3 x 4' board should be 78”, and a 2 x 3' should hang no higher than 72”.

What is the difference between a whiteboard and a dry erase board?

The Terms “Whiteboard” and “Dry Erase Board” Have the Same Meaning. To clear up this confusion, you can rest assured that the expressions whiteboard and dry erase board are synonymous; that is, they have exactly the same meaning.

How do you stick a whiteboard to a brick wall?

How do you hang a whiteboard on a brick wall? Use a missionary drill bit, a drill(electric or cordless), plastic anchors. Now, here's the choice: drill holes into the brick, or drill holes into the joints between the brick. Some brick is soft, but around the edges it's subject to cracking, and could possibly fall out.

How do you hang a big whiteboard on drywall?

Ideally the corners of the board will line up with the studs on the wall and you can just mount straight to the studs. This is ideal and will provide the strongest anchoring for the board. Less than ideal would be using a drywall anchor but I consider it acceptable for this application.

What not to use on a whiteboard?

Never use liquid whiteboard cleaner to remove wet marker ink. Do not use glass cleaner, Clorox® wipes, or all-purpose cleaners as they will damage the whiteboard surface and void the warranty. The surface should be cleaned only with dry erase wipes, liquid board cleaner, or a damp wet cloth.

What is ghosting on a whiteboard?

Whiteboard ghosting occurs when dry erase marks are left behind and cannot be erased. Normally, most dry erase marks can be simply wiped away using a whiteboard eraser, and more stubborn marks can be cleaned away with a damp cloth.

Does Windex ruin whiteboards?

Yes, Windex can be used to clean a dry-erase board, but only on certain types of boards. For porcelain and glass dry-erase boards, Windex is an effective chemical-based cleaner. However, Windex can damage the surface of melamine dry-erase boards, so it is not recommended for these types of boards.

Does hand sanitizer ruin whiteboards?

-Hand sanitizer:

Therefore, hand sanitizers may not be the ideal choice as they can leave residues or cause staining on the whiteboard surface.

How do you hang things without damaging walls?

According to SFGATE's Home Guides, adhesive hooks work a lot like poster putty but are stronger, since they can also hold framed pictures. Apply a stick-on strip to the wall and to the back of the hook. Line them up and stick them together. Then all that's left to do is hang your chosen décor onto the hook.

What works better than command strips?

When should you not use command strips?

The Outdoor Product line is not recommended for use on rough surfaces, such as cement board, brick or rough-sawn wood. Will Command™ Products stick to brick? No. Command™ Products are intended for mostly smooth surfaces such as those listed above.

Which side of Command strip goes on wall?

Don't use household cleaners like wipes or sprays because they leave behind a slippery residue. Separate the strips and remove the black liner—it's the one marked "Wall Side". Now press the strip directly onto the wall where you want to hang your hook. Press along the entire strip for 30 seconds.

How do you remove command strips without damaging paint?

First, gently heat the strip with a hairdryer on low heat to soften the adhesive. Then, use a plastic scraper or credit card to carefully peel the strip away from the surface, applying even pressure.

How do you hang things up renter friendly?

Hook and loop strips

Velcro and other hook-and-loop tape brands have a double-sided adhesive backing. You stick the hook side to the piece you want to hang and the loop side to the wall. You can also remove these strips without damage to the walls when you move out of your apartment.

Where do you put dry-erase board in a house?

How do you put things on the wall in a rental?

Most landlords are not keen on their tenants drilling holes in the walls. One way around this is to use removable, self-adhesive hooks to hang your favourite piece or macrame wall hanging. Just check what weight they can hold as they do vary.